| | |
|
| |
| | |
|
|
XS Scuba LP-Series 2640 psi
|
Our Price: From $255.00 to $360.00
Manufacturer: Worthington
Select an Option for Price & Availability
| |
|
Features
During the process of hot dip galvanizing, the exterior of our steel cylinders are submerged into 840°F molten zinc. The process deposits an 8-10 mil thick zinc barrier to protect against the corrosive ocean environment. This layer of zinc metallurgically bonds to the steel cylinder. It will not chip or wear away like painted a zinc finish.
Low Pressure - 2400+ psi Specifications
| Description |
LP Series 77 |
LP Series 85 |
LP Series 95 |
LP Series 108 |
LP Series 121 |
| Model |
LP77 |
LP85 |
LP95 |
LP108 |
LP121 |
Service
Pressure |
2400+ psi |
2400+ psi |
2400+ psi |
2400+ psi |
2400+ psi |
True
Capacity @ 2640 psi |
77.0 cu ft |
82.9 cu ft |
93.3 cu ft |
108.6 cu ft |
120.0 cu ft |
Buoyancy*
FULL |
- 6.8 lbs. |
- 7.1 lbs. |
- 10.1 lbs. |
- 10.7 lbs. |
- 11.1 lbs. |
Buoyancy*
EMPTY |
- 1.0 lbs. |
- 0.7 lbs. |
- 3.0 lbs. |
- 2.6 lbs. |
- 2.0 lbs. |
Weight
EMPTY |
32.5 lbs. |
34.3 lbs. |
41.9 lbs. |
45.9 lbs. |
49.9 lbs. |
Outside
Diameter |
7.25 in. |
7.25 in. |
8.00 in. |
8.00 in. |
8.00 in. |
Cylinder
Length |
23.2 in. |
24.7 in. |
23.7 in. |
26.5 in. |
29.2 in. |
Valve
Included |
VA200 |
VA200 |
VA200 |
VA200 |
VA200 |
*in sea water with valve
- Manufacturing Process: Built from Chromium Molybdenum steel plate.
- Utilizes the deep drawn process; the preferred method to build a steel scuba cylinder.
- This process yields a cylinder with a very uniform wall thickness resulting in a lighter, more efficient cylinder.
- Buoyancy: These cylinders have been designed to be slightly negative at the end of a dive.
- Exterior Finish: Hot-dip galvanized - the absolute best finish for a steel scuba cylinder.
- Nitrox Ready: Cleaned and sealed at the factory.
- Free of hydrocarbons to a level of 40 mg per square meter.
- Ready for pre-blended Nitrox up to 40% FO2.
- Valves: All XS Scuba steel cylinders include the Thermo PRO valve.
- Convertible design allows for standard yoke or 230 bar DIN connections.
- Standard inlet thread (3/4"-14 NPSM) on cylinder allows upgrade to any other Thermo valve.
- These valves are clean for pre-blended Nitrox up to 40% FO2.
|
|
font size:
|
|